Extruding Machines for Rubber
- 產品服務:
單螺桿擠出機; 雙螺桿擠出機; 橡膠擠出機; 換網器; 熔體泵; 線纜直角擠出機頭; 水下造粒系統; 廢塑料清洗機; 廢塑料干燥機
- 所屬類別:
供應 > 擠出機
- 單價:
0.00
- 最小起訂
量: 0
- 供貨總量:
0/臺
- 發貨期限:
3
- 有效期至:
長期有效
- 最后更新:
2016-07-06
公司的基本資料信息
- 郵件: info@telfordsmith.com.cn
- 電話: 0574 8309 2181
- 手機: 18067127628
- 地區: 寧波市
- 地址: 浙江省寧波市江北區洪塘工業A區洪達路8號?
產品詳細說明
Barrel Heating/Cooling:
Telford Smith rubber extruders are equipped with specially designed, jacketed barrels as standard. Telford Smith jacketed barrels are of a three - piece design, consisting of an outer and inner layer and a completely separate liner. The liner therefore can be replaced once it has worn out with no need to dismantle the actual water jackets. The jackets are welded and pressure tested to 250PSI, and can handle water or oil.
Feed Section:
Telford Smith rubber extruders are available in either hot or cold feed versions
Hot Feed
The feed section for the hot feed extruder is a fabricated, jacketed section with a separate liner. The liner is typically undercut and also nitrided. There are many different designs or openings available. These include; round, square, rectangular, centred, tangential.
Cold Feed
Telford Smith has, for over 20 years, manufactured an independently driven feed roller for cold feed extruders. This type of roller has a driven shaft via a chain and sprocket arrangement to a geared AC motor. This gives the extruder infinite choices for screw speed Vs feed roll speed. The geared AC motor is typically fitted within the confines of the main base and therefore does not affect the width or length of the extruder. The feed opening is on the side with the hardened feed roller mounted via hinged swing arms. The arms are precision ground flat and are bushed for the roller shafts. This particular design of feed is not jacketed as such; instead a cross-drilling method is employed to provide for a cooling medium. A separate nitrided undercut liner is fitted.
Cold feed or hot feed with optional screw diameters 1.4", 2.5", 3.5", 4.5", 6". Cold feed with independently driven feed roll. Custom built to your requirements.
本企業其它產品
{php $tags=tag
("moduleid=5&condition=username='$username' and
status=3&pagesize=5&template=null");}
